DiscoverDesign.org is produced by the

Serene Gates Park

By 1334652 | L Pocket Park Design | 2015 National High School Architecture Competition

Overview Instructions

Show Hide

Welcome to the 2015 DiscoverDesign.org National High School Architecture & Design Competition!

This year's real-world design problem is to design a pocket park for your neighborhood or school. Click to view the 2015 rules and entry guidelines and registration. 

Check out the 2015 Top 10 Winners!

Design Challenge Background

Pocket parks have the ability to activate under-used or open spaces, and turn them into vibrant community spaces. No matter where they pop-up, they provide a unique place for people to gather, rest, play, or escape the hustle and bustle of the day. Cities across the country have been creating more and more pocket parks to bring neighborhoods to life & create a positive sense of place and pride for their community. A pocket park is a small park, typically build on a single vacant lot or on a small irregular piece of land, that is accessible to the general public.

Design Challenge Brief

 
Design a pocket park for a small piece of land near your school or in your neighborhood. Your design needs to provide spaces for groups to gather, spaces or activites for multiple age groups, and should be no bigger than 14,500 square feet. What might a park look like that is designed with community needs in mind, as opposed to a one-size-fits-all design?

A standard lot size in Chicago is 50'x125'. You could occupy two Chicago lots, adjust the dimensions, or find a lot in your neighborhood that does not exceed the square footage. Can't find an open space? Redesign one!

Your design should include a variety of elements that make a park... a park! From benches, bike shelters and meeting spaces, to playgrounds & pavilions, to cafes, information kiosks, or arts performance areas. You should also consider sustainability issues and the environmental impact of your design.

 

HINT: Click the little 1, 2, or 3 on the image to get more information and tips throughout the project! 

A pocket park is a small park accessible to the general public on a single lot | Photo courtesyof sourcethestation.com

What should I upload?

For your Overview, it is important to post a short, but clear, ‘success statement’ that communicates the goals you hope to solve and achieve through your design solutions. When you’re nearly finished with your design project, you can go back to this success statement to see if your design has met the criteria you first proposed.

For each step along the Design Process we'll give you some suggestions on what to think about, try out, and upload.

A History of Pocket Parks

Pocket Parks have been a community-benefiting solution for activating under used spaces for many years. Learn about New York's parks' history HERE!

Staying Happy and Healthy

Learn more about how mini-parks are helping encourage physical activity and making neighborhoods better. Here is a link to information from the National Recreation & Park Association.

The park will receive the name of Serene Gates Park as it will be covered in with trees throughout the landscape creating a nice and peaceful area. The park will also include other various types of vegetation to include a mix of diversity to appeal to the surrounding area. Multiple walkways and paths will be added to the park to allow ease of access throughout much of the acreage. The walkways will probably vary from concrete to cobblestone. A small field has been created for the use of child play. Several shading structures have been created for use of relaxation and shade. No water features were included as it is a waste to the environment. The park’s plan will be designed so that it will allow anyone and everyone to gather as well as promote family aspects of unity.

Comments

You have some thoughtful ideas about creating a park for everyone to use and relax in. I liked how you created different types of spaces in your park. Your final renderings are great! I would be careful about design for all people such as people with disabilities. Cobblestone walkways are usually very difficult for people who use a wheelchair and for people who have chronic disorders. But you can easily do a cobblestone print with concrete to make it accessible!

By leslierobinson7, Architect at 10:43 pm, 02 June 2015

Collect Instructions

Show Hide

Upload a quick sketch of your ideas! | San Francisco park sketch, photo courtesy of ArchitectureForHumanity.org

Collect Information

In the Collect Info step of the design process, you try to gather as much information as possible about your existing school or community parks and spaces, along with the students, staff and neighbors who will use it.  You can't propose new solutions until you figure out and document what the existing problems are.

What makes a park?

No two parks are the same, so what is it that turns a park from just a plot of land to a vital community space? Take a look at parks near your school, home, work, neighborhood, and city! For the Collect Info step of the Design process you'll gather notes, sketches, photos, videos, etc. of your observations and research. 

Try This

  • Walk around your school grounds and a neighborhood park. Take pictures of what makes that space a "park".
  • Visit Flickr or another photo sharing site and search for types of parks. Determine good and bad examples of how parks meet the needs of their community - for all ages.
  • Post images of buildings, colors, designs, textures, or other things that inspire you in this step. Make sure you give credit to your source!
  • Don't forget to explain your thinking in writing for every image you upload! Tell us why it's important and how it's impacting your thinking.

Think about

  • What kind of outdoor spaces does your school have? Would you consider them a "park"? Why or why not?
  • What kind of parks are in your community? What do you like or dislike about them?
  • Who uses parks? How do different people use parks? Do they all use them the same way or differently?

Colorful sheltered playground at Fuji-Hakone-Izu National Park, Japan

What types of structures do parks have?

No two parks are the same - each is designed with a specific community and use in mind. Therefore, there are many different types of activities and spaces for people of all ages to enjoy and interact with. Here are a few ideas to kick start your research (Hint: these are great words to search in Google Images!).

Adventure playgrounds

While professional designers used to play a major role in the design of playgrounds around the world, the playground often seen today is a primary-colored collection of plastic equipment with predetermined uses, leaving little room for children’s imaginations. Landscape architects such as Michael Van Valkenburgh are now incorporating different kinds of play spaces into their designs, including in the new Maggie Daley park in Chicago. These ‘adventure playgrounds,’ as they are often called, are made of natural materials and sculpted landscapes with abstract shapes and materials, allowing for the most freedom for imagination.

www.toxel.com 

Bicyle Shelters

Outdoor bicycle shelters can be both functional and beautiful in a park space. They offer park visitors a place to lock up their bikes and protect them from the weather.  Great places to store bikes safely and in an interesting way can encourage community members to ride their bikes more, and be sure to make a stop at your pocket park! A company called Park-a-Bike specializes in creating these structures - Learn more HERE!

Ruby Hill Park in Denver, CO | Photo courtesy of levittdenver.org

What types of structures do parks have?

Looking for even more information? What kinds of pavilions or structures have you noticed in parks near you? Have you ever seen a parklet? Here's some inspiration:

Pavilions

Pavilions can be in many forms or functions. Some are simple and protect picnickers from a rainy afternoon. Others are sculptural, outdoor park kiosks, or for community performances! 

Think about: What kind of pavilion would your neighborhood benefit from? What examples can you find? What do you like or dislike about them? Why?

Once you choose a kind of pavilion, you'll need to think about what it needs to have inside and out. Here are some things you may want to include in your design:

  • public and/or private use spaces
  • bathrooms
  • storage rooms for food, supplies, or winter storage
  • seating for performances or gathering
  • tables and chairs; benches
  • functional spaces based on your specific pavilion: a kitchen, backstage, open outdoor areas, information windows, etc.

www.behance.net

Parklets

Take inspiration from these tiny parks that pop up in unexpected places like parking spots. Many of these parklets are created by community members looking to activate a space in their own neighborhood, and are moveable, foldable, and able to literally pop-up anywhere!

Think about: What do you notice about their use of space? What kinds of activities can they accomodate in just one parking spot?

www.wrtdesign.com

What should I upload in this Collect Info step?

Help us understand the existing conditions and the location of this park. The following types of work should be uploaded:

  • photos
  • a short video
  • site plan drawing of your existing parks or lot.

Bicycle Cities

Biking is a popular -& green!- way to travel. Yet if there is nowhere to lock up your bike, people may be discouraged to use their bike to get around. Did you know that you can Request a new bike rack in your area? Cities all over the U.S. have multiple types of bike racks they can install and all you have to do is submit a request. Where would you like to encourage people to use bikes instead of cars? CLICK HERE to learn about bicycling in Chicago.

1334652's work for the Collect Information step:

Summary
When deciding how to plan for the park, important aspects had to be considered such as how will the park be designed so that it accommodates an easily accessible area.
This is an aerial view of the proposed site plan.
0 comments
0 comments
Since the park site is in a heavy residential area, the proposed park should incorporate space in...
0 comments
I like the idea of having a shading structure such as the gazebo to blend in well with the park and...
0 comments
This small pocket park uses the space well between the buildings and creates a nice spot for the...
0 comments
One important factor I would like to take into account of the park is the use of different colors...
0 comments
I think that the park should include benches as a means to sit and enjoy the park.
0 comments

Brainstorm Instructions

Show Hide

Silver Spring Metro Pocket Park | Photo courtesy of eleven55ripley.com

Brainstorm Ideas

In the Brainstorm Ideas step of the design process, you will develop ideas from all of the information you've collected. You will start to be inspired by new places and you put some early ideas down on paper that show what you've found in the Collect Info step. You also might take more photos to show specific new ideas you have. 

The simple diagrams you make here will help you understand how the  pocket park location and design compare with your new ideas.

Try This

  • Draw a floorplan or siteplan of your parks existing facilities. How are all of the different spaces connected? What are the different pathways you can take through all of these spaces? Map all of these structures and spaces.
  • Use Google Maps to view and print out an aerial photo of your park. Take measurements of the overall dimensions of the area, of both structures and outdoor spaces and use the aerial to map out the measurements.
  • Post this aerial map and sketch here so everyone can understand the relationship between your school building, the neghborhood, park spaces available, and the proposed site of your new park or redesigned park features. Describe the surrounding area and note existing structures such as paths, seating, bike racks, pavilions, playgrounds, concession stands, and any fences. 
  • On a piece of tracing paper placed over the aerial photo of your school, sketch a diagram showing a large arc around the building to show the path of the sun throughout the day.  This drawing is called a site analysis diagram.  (Remember, the sun rises in the east and sets in the west.)

Landuse Map in Cary, North Carolina | Photo courtesty of townofcary.org

Think About

  • Will your new pocket park replace your school or neighborhood's existing park spaces or become an addition to a different part of the community? Will it be built in an empty lot or space?  Will it be between buildings, out in a field, or built on the roof?  You decide.
  • Spend some time looking at the aerial photo of the area you select.  What types of other buildings surround your the site?  Homes, businesses, parks, parking lots, or an empty field?  How will these other buildings impact the design of your new athletic pavillion? Create a land-use map!
  • What types of streets surround your school? Are they busy or quiet? What types of streets are in your neighborhood? What might be the best place for people to relax and play?
  • Based on the site analysis diagram you've sketched, where is the sun located throughout the school day?
  • How can the structures and outdoor areas of your new pocket park be positioned to take advantage of the sunlight for good lighting?

Take A Book, Return A Book

Parks can be places to read, learn, dream, and share - Check out the Little Free Library project! They're popping up in communities all over the world!

What should I upload in this Brainstorm Ideas step?

Consider uploading

  • hand sketches
  • site plan drawings
  • a quick study model of all your first ideas.

You can scan these drawings or take photos of your model.

1334652's work for the Brainstorm Ideas step:

Summary
I looked at the overall site plan to see how the park may fit within the community.
This image is of the overall site plan the proposed park will be located.
0 comments
The photo is of the location the proposed park will be created in the surrounding neighborhood.
0 comments
I think adding an apple tree to the park would be a great way for the park to incorporate family...
0 comments
The image above is a possible layout of how I think the site should be oriented in the surrounding...
0 comments

Develop Instructions

Show Hide

Pocket Park with Bocce Ball court | Photo courtesy of Lennar

Develop Solutions

You've been gathering all sorts of information, and brainstorming creative options for your pocket park. Now it's time to put all the pieces together and make some final decisions. In the Develop Solutions step, your rough ideas come together with drawings and models that can show others your solutions for a new pocket park.

Try This

  • Try out different ideas and save each “version”. You do not want to lose a good idea later!  Other people viewing your project - other students around the country, your teacher, and mentors - want to see how your ideas have changed over time. This means that while you're working on your digital model, you’ll want to be sure to keep re-saving it with a new file name every few days as you work through the steps.
  • Make a list of your ideas and associated sketches, or practice models. For your final upload you will want to write a short but effective paragraph of your process and what you found. This will inform the direction you will take for the final solution.
  • Show your ideas to your teacher and peers for some feedback. You can also review your progress with the test group you may have interviewed and test whether your design would meet their needs or address their concerns. Learn from the feedback you receive and incorporate into your final design solution.
  • Do not leave work for the last minute! Going through a detailed design process requires time to gather information, develop ideas, and make improvements. This is difficult or impossible if you try to pull everything together a week before your project is due. Projects that are researched, developed, and well executed will always stand out!

CAD rendering of a park space | Photo courtesy of ivarskalvans.blogspot.com.jpg

Think About

  • Are you reaching your success statement? Review your design and test it against your own observations and review that it has met the project requirements. Did it meet the expectations of the end users that you spoke to? Who is in your community?
  • How do you imagine people will interact with your new pocket park? What will your design contribute to the neighborhood? Why? How so?
  • You have designed with community in mind. What role does the community play in any architect's plans? Talk about it.
  • Keep your park full of activity! How will your park be used in different seasons or weather? Have you been imagining different events or programs that could happen here? Tell us about it! (Check out the High Line in the blue sidebar for some ideas...)

What should I upload in this Develop Solutions step?

  • images (JPG, GIF) of your rough digital model.
  • an axonometric or perspective view of your model with people, which will help others understand the scale of your park.

It's ok if your model is still a work in progress.

1334652's work for the Develop Solutions step:

Summary
In order for the park to fit well with the community and other various components, I thought about what would be beneficial to the park such as walkways, paths, grass areas, and shading components.
The park contains benches spread throughout the walkways to provide seating and relaxation.
0 comments
This is a shading component that can be used by the public on summer days or on sunny days in...
0 comments
This sketch is of a proposed sitting area with a planter attached.
0 comments
The image shows the park with a gate surrounding it. The purpose of the gate is to protect the...
0 comments
The image shows the relation of the pathways in regard to the spaces created for vegetation and...
0 comments
The image was of a previous design for the park as I wanted to incorporate the planter with seating...
0 comments
The image shows the planter and how the trees will provide both shading and a nice place to rest...
0 comments

Final Instructions

Show Hide

Chicago's 606 bike paths and parks transform an old defunct railway | Photo courtesy of the606.org

Final Design

You're almost there! The Final Design step of the design process is to create more finished drawings and models that illustrate your ideas to others. Remember, your explanation text, and the types of drawings, images, and models you share need to tell the whole story of your project to someone who may or may not have ever visited your neighborhood or pocket park site.

Try This

  • Review your design and test it against your original sucess statement that you wrote for the Overview. Does it meet this criteria?
  • You might want to share floor plans, elevations, renderings of your digital model, photos of a physical model, or a video animation of your model.
  • Be sure to comment on other projects in the competition to foster, encourage, and build an online design community of learners in DiscoverDesign. Who knows, they might just have a great idea to help bring your project to the next level!  CAF will also recognize students that provide both encouragement and constructive criticism on students' work throughout the run of the competition.

Multi-use pocket park proposal | Photo courtesy of archreview.blogspot.com.jpg

Think About

  • Does your final design meet the expectations of the students, community members, and/or school staff   that you interviewed?  If not, you may need to go back to the drawing board and revise your design. 
  • For your final design, you will want to post a short but effective paragraph of your process and the unique solutions you found and developed. Tell us about your ideas and how they may or may not have changed over the course of the project.
  • What essential skills have you learned? Think about where you started this class or project and what you know now. Practice writing about this here - it might come in handy for a job or college application!

What should I upload in the Final Design step?

  • final hand or digital renderings
  • images of your finished physical model
  • or your finished digital model

You can even include links to a YouTube or Vimeo of a digital walk-through like this one: https://youtu.be/ncaVQ2V6XXU

Adaptive Reuse

Architects often find creative ways to reuse old structures that are no longer in use. Check out how old rail lines were adapted to create New York's High Line and Chicago's 606.

1334652's work for the Final Design step:

Summary
After researching and reviewing parks I decided on my final design. I would like to make the park a nice and easy-going place filled with family aspects.
The image above shows the final layout of the park on the corner of 6th Street and Garces Avenue.
0 comments
The image shows the front entrance of the park leading in from the sidewalk.
2 comments
This is the finished gazebo along with the grass space for play or relaxation.
0 comments
This image shows the finished model of the planter and seating along the park paths.
0 comments
The image shows the apple tree garden in which families can come together and pick the fruits.
1 comment
The image shows an overall view of the park.
0 comments
The image shows another perspective of the park.
2 comments